Write a Review

Kenda K1247 Amrak Tire - Clincher - Wire bead - 30tpi

The Wolf Tooth 76 BCD chainrings work great on any 76 BCD spider or crankset. These will replace the more expensive rings used on SRAM XX1 spiders or other manufacturer's spiders such as Cannondale. Also a great fit on the Specialized Stout crankset. - Fits any 76 BCD crankset or spider - Drop-Stop® technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Note - Use standard M8 chainring bolts, not the M8.5 bolts included with XX1 spiders. Our patented Drop-Stop tooth design provides superior chain retention, wear life and mud-shedding capability. Compatibility: - These rings fit any SRAM 76 BCD spider or Specialized Stout crankset. Here are instructions on how to measure your BCD. - Threaded for standard M8 chainring bolts. For the XX1 spider, we recommend the 6mm bolts (or any short M8 chainring bolt). For the Stout crankset we recommend the 10mm bolts or the bolts that come with the crankset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 30t/45g | 32/51g - Material: 7075-T6 aluminum - Made in the USA

Top Fuel 9.8 is a full suspension carbon mountain bike for riders who don't settle. Not for parts nor for one style of riding. It combines a high-end component package with a low-weight carbon frame for one unbelievably fun rig that's fast on flow and fun to ride on techy singletrack. - Wider Line Elite 30 wheels provide better tire support so you can run lower pressure and get more traction - A sleek internal storage compartment gives you a versatile spot to stow tools and gear - This bike’s killer suspension setup is both efficient and ready to party - New, removable Knock Block has a bigger steering angle to keep cables and hoses safe without sacrificing turning radius

Precision 3D-Net shaped forged shaft interconnects with a precision broached clamp to create a strong, light, and secure stem offering +/-55 degrees range of adjustment. - Adjustable from +40 to -32 degrees - Stainless bar and stem clamp bolts

Shorter than full tights, longer than shorts — the C3 Women 3/4 Tights provide the perfect amount of coverage and comfort for chilly mornings or those transition months. - ACTIVE seat insert - High performance fabric mix for support and comfort - Overlock seams add durability and minimize chafing - Wide and flat grip elastic at thighs to keep short in place - Inseam length 23cm / 9-inches - Optimized seam placement for comfort - Reflective details

The Vale Go! 9D EQ will comfortably handle anything from everyday errands to daily commutes to fun getaways. This e-bike features a powerful Bosch Active Line Plus motor, fully integrated battery and a step-thru frame. Bosch's Kiox display delivers Bluetooth connectivity and advanced rider information. Most importantly it's an Electra, so it's a blast to ride. It's right for you if... You are looking for a versatile and stylish pedal-assist e-bike. Equipped with fenders to keep you dry and LED lights to keep you safe, the Vale Go! 9D EQ is ready for your everyday adventures. The integrated MIK rear rack increases functionality allowing you to add panniers and a basket, crate or pet carrier on the fly. The tech you get Powered by a Bosch Active Line Plus motor and outfitted with Bontrager E6 Hard-Case Lite 27.5" tires, hydraulic disc brakes and suspension seatpost, this bike is sure to give you a smooth ride on any terrain. The Bosch Kiox display delivers data on speed, performance, battery charge and more, while adapting to lighting conditions for readability. The final word Go! explore the city. Go! to work. Go! for a weekend cruise. The Vale Go! 9D EQ delivers the best in e-bike innovation combined with the comfort and control of our patented Flat Foot Technology. Get to your destination and beyond, but do it in style. Why you'll love it: - The Vale Go! 9D EQ features our patented Flat Foot Technology and Bosch Active Line Plus motor for optimal comfort and control. - Easily monitor rider data such as speed, battery charge and turn-by-turn navigation in one place with the hi-resolution Bosch Kiox color display. - The step-thru frame provides easy on and off maneuverability. - Equipped with color-matched fenders and LED lights, this e-bike is ready for all conditions. - Turn your e-bike into a me-bike by adding a basket, bell or helmet. The e-ssentials, of course.

Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface  - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

FX 2 Disc is a stylish and versatile hybrid bike with disc brakes that let you stop on a dime and ask for change, even when the weather isn't cooperating. Train, commute, or ride for fun with the lightweight Alpha Gold Aluminum frame, 18 speeds, and semi-skinny tires that are fast on the road and stable on loose terrain. It's right for you if... Raining cats and dogs? That doesn't keep you from riding. You want a high-value hybrid bike with the superior all-weather stopping power of disc brakes, plus a lightweight frame and quality parts that will hold up over time. The tech you get A lightweight aluminum frame with hydraulic disc brakes for all-weather stopping power, a Shimano drivetrain with 18 speeds and a wide range of gearing so you're never pedaling too hard or too soft, and mounts that make it easy to accessorize your ride! The final word FX 2 Disc is a go-anywhere hybrid bike with parts that perform on training rides, trips to the market, or your morning commute. It has endless options for accessories, but what really sets this model apart is the disc brakes, which provide great stopping power in all weather conditions. Why you'll love it - More confident braking means bad weather doesn't have to keep you from enjoying your ride - It's versatile and does whatever you want it to do, whether that's riding for fitness, commuting, or cruising to the farmer's market to pick up groceries - It's easy to accessorize with racks, a kickstand, fenders, lights, and more! - Like every Trek hybrid, it's backed by a lifetime warranty and supported by a wide network of retail partners - The cables are routed internally, which protects them from the elements and adds to the bike's sleek look

Wolf Tooth Precision Headsets for Trek Knock Block are machined in the USA out of aircraft grade aluminum with superior sealing for protection against the elements. Available in a variety of colors to add some style to your bike. These upper headsets are for Trek frames with molded-in internal bearing cups. - Designed to work with Trek's Knock Block system - The top cap on these headsets have unique raised features that key to Knock Block compatible stems (made by Bontrager - If spacers are needed, you will need to use special Knock Block compatible spacers with notch features - This product is the upper headset only - Lower headsets on bikes with Knock Block do not have any unique features. They are usually IS headsets which are available separately

Simply Accurate – Maintenance-free, Reliable and Affordable Our torque tools use intelligent design for accuracy without the need for expensive calibration. An industrial-grade internal spring manufactured within extremely tight tolerances pre-determines torque setting. The tool does not need to be set into calibration and cannot shift out of calibration. Bits Included Each Tool includes removable Bit holder and (6) High-quality Nickel-Plated S2 Steel bits. 3NM Bits: H2, H2.5, H3, T10, T20, PH0 4NM Bits: H3, H4, H5, T20, T25, PH1 5NM Bits: H4, H5, H6, T20, T25, PH2. Easy to use Ergonomic handle fits your fingertips and includes a spinner grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 50% lower height than tools costing twice as much. Use it like a tool – safe to un-screw! Prestacycle's TorqKey is fast and easy-to-use as an everyday tool. Color-coded tension markings on both sides make it a quick-grab on your workbench. They provide Torque relief in the right (clockwise) screw tightening direction, and hold firm in the left (counterclockwise) unscrew direction. You can unscrew fittings that were just tightened with the TorqKey. This is very handy when making multiple attempts to get a cable adjustment just right. NOTE: Do not use TorqKey to remove stuck, damaged, rusted or over-tightened fittings. More Options Prestacycle Pro TorqKeys are available in 4Nm, 5Nm, 6Nm, 7Nm, 8Nm, 10Nm and 12Nm. Combine TorqKeys with our Ratchets and Bit sets to make a more complete tool set for Bicycle servicing. Standard Magnetic Hex Tip works with our 20 Piece Bicycle Bits set, our long Bicycle bits and any other 1/4" Hex bits. Prestacycle TorqKeys are different… designed from the start with real-world experience on Bicycles. Specifications: - 3NM included Bits: H2, H2.5, H3, T10, T20, PH0 - 4NM included Bits: H3, H4, H5, T20, T25, PH1 - 5NM included Bits: H4, H5, H6, T20, T25, PH2 - Torque value accurate to + / – 10%. - Provides 20 degree overrun when maximum torque is reached. - Overrun provides user with unmistakable feedback when torque value is reached. - Polymer Finger grip Handle with spinner top ergonomically designed for comfortable use. - Color-coded tension markings on both sides. - Magnetic 1/4" hex bit retention makes bit changes easy. - Torque accuracy life-cycle exceeds 5000 cycles. - Simple to Judge – If the logo is worn, the tool is past life. - Replacing the tool costs less than other tool's calibration service. - Height: 78 mm, 3.1 inches. - Width: 52 mm, 2.1 inches. - Weight: Approx. 48 grams. - 1 Year limited consumer warranty. Disclaimers Check with the manufacturer of your components and fittings for proper torque specifications. Always follow Manufacturer guidelines for installation and removal of nuts, bolts and screws.

Champion 2.0 Black Spokes - One 264mm spoke = 7g

This advanced cycling jersey brings dynamic styling and ultimate comfort to your toughest off-trail rides. Freedom of movement and superior moisture transport make the Offroad SS jersey optimal for high intensity mountain biking and gravel cycling. Two zipper pockets, three open back pockets, silicone tape at back bottom hem for keep the jersey in place along with silicone print at shoulders for improved grip when carrying a backpack are thoughtful details that put the Offroad SS jersey at the front of the line for essential off-road cycling gear. - Functional fabric that provides great moisture transport and comfort - Five pockets (two zip) - Three open back pockets with enlarged size - Silicone tape at back bottom hem keeps the jersey in place - Silicone print at shoulders for improved grip when carrying a backpack - Reflective tape details

For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23-deg sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong, and durable, and great for long days bikepacking, touring, or shredding singletrack. - Constructed using double-butted, AL-7050-T76 aluminum - Bar sweeps forward, then back, to preserve stem length - 5-deg upsweep allows adjustment to suit personal preference - Bar can be flip-flopped to run up or down - Graduated ends for easy trimming - Bead-blast black finish

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

As the name says, it’s a city shoe. Here’s a great high-tech and versatile product with great features that you can also wear to go for a coffee or groceries. You will barely feel the elastic tongue on your foot. Make a smart choice. Go for comfort and quality. Our patented T-Flex outer sole was designed for you to be able to walk everywhere you want after the ride. You won’t believe how comfortable you are while semi-floating on our technical foam... - Technology : Integrated X-Comfort Zone technology with better stretch - Easy slip on and breathable for great comfort - Outsole: New T-FLEX rubber sole: Adapted for any surface and provides good traction - Insole: Regular EVA insole - Cleats: SPD compatible with 2 bolt

ZIPP Service Course Bar End Plugs, Qty 2.

Remedy C is a tough full carbon all-mountain frame that's burly enough for the roughest lines, and light enough to make that next climb seem a little shorter. This stout trail bike frame has 150mm of travel and a FOX DPX2 shock that keeps up on long, bone-rattling descents without giving up pedaling support. - "Wait for me," said no Remedy rider ever. This bike has a lot of travel, but it's also extremely quick on the flats and climbs - You’ll fade before the FOX DPX2 shock does—it's built to help you squeeze the most out of long, gnarly descents - Mino Link lets you make small adjustments to your geometry quickly and easily, even mid-ride - Wider is more stable: Remedy has clearance for up to 27.5x2.8 tires - Control Freak cable routing lets you run any set-up, like a right-front brake, internally-routed dropper, or electronic shifting

Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

The thin profile Aireator features an open mesh weave over the foot top, making these lightweight socks ideal for all forms of cycling and everyday adventure. Breathable, moisture wicking, and durable. - No padding / 4-season / synthetic - Content: 60% Nylon, 39% Recycled Polyester, 1% Lycra - Weight: 1.6 oz/.10 lb - Care: Machine wash cool. Tumble dry low. No bleach, softeners, or harsh detergents. Engineered to be long-lasting, DeFeet products are sustainably manufactured within a local supply chain. Our wool goods are made from USA-grown Merino, traveling from Oregon to the Carolinas for processing and knitting. Our recycled poly is manufactured right here in North Carolina at Repreve from locally collected post-consumer water bottles.

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

Walk like an Egyptian in these stoney grey crew socks inlaid with gold and royal blue Egyptian flair. Socks so soft, your feet feel like royalty. - Product Features: - Ultra-wicking acrylic base with superior softness and stretch to eliminate hot spots and blisters. - Mesh upper for ultimate airflow. - Exclusive Easy-Fit cuff never falls down. - Unique Stretch-to-Fit sizing system for a perfect fit on a wide range of foot sizes. - Cuff Height : 6" - Made with : Micro-Denier Acrylic - Style : Crew

Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use

Fuel EX 9.8 GX AXS is a trail-charging machine that packs a punch on the singletrack with a lightweight and stiff carbon fiber frame that damps jarring vibrations and holds its own when you pick a line. It's loaded with the tech you want, like SRAM GX AXS wireless shifting for remarkably reliable shifting under load, plus a 150mm front and 140mm rear FOX Performance suspension package that smooths the roughest trails. It's all topped off with carbon Bontrager wheels that shed weight and keep tracking precise.  - Fuel EX Gen 6 gives you 140/150mm of travel and slack, adjustable geometry for an extra capable ride, plus, in-frame storage on all models — even alloy - It comes equipped with light and stiff carbon wheels that make quick work of technical terrain and keep you on your line when things get hairy - You get the latest technology in SRAM's GX AXS 12-speed transmission for precision shifting — even under load, plus a FOX Performance suspension package - With the adjustable angle headset (angled cups sold separately) and Mino Link, you can choose from six different geometry configurations - We expanded our size range to ensure a better fit for all riders and use the best-fitting wheels for each frame size: XS frames get 27.5-inch wheels, S frames get to choose between 27.5-inch or 29-inch, and sizes M and up get 29-inch wheels

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.